The Cantek C14RS Straight Line Ripsaw is a single-blade ripsaw is geared towards the shop looking to increase efficiency in their ripping operations but cannot justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the C14RS can produce a glue joint finish ready for panel glue-up right out of the saw.
Why Cantek C14RS Straight Line Ripsaw?
- Produces a guaranteed glue joint finish to 15′, which eliminates the need to joint the material after ripping
- Precision straight line feeding for parallel and accurate rip cuts
- Eight hold down rollers over six rows ensure material is firmly held during cutting operations for a longer period resulting in a straighter, more precise cut
- Powerful 20HP saw motor for even the most demanding rip applications
- Maintenance-free chain track with the use of a reliable mechanical lubrication system
- Variable feed speed by frequency inverter for optimum cutting results
Key Advantages
- Cast iron saw assembly, column, and table with superior vibration damping properties for optimum cutting results while ensuring long bearing and machine life.
- Very rigid machine body with a welded steel frame
- Absolute straight line feeding with glue joint to 15 ft.
- FC35 cast iron chain track with double-V design ensures precision straight-line ripping with a long wear life
- Precision Built Saw Arbor constructed of nickel-chrome steel, large diameter, accurately ground and dynamically balanced.
- Arbor runs in precision angular contact type ball bearings (eliminates any radial run-out & axial thrust) – V Belt driven from below.
- Mechanical operation chain oiler provides consistent lubrication to the chain track and automatically adjusts to your feed speed.
- When oil runs low, a warning light will come on, and when it gets too low, the machine track stops running to avoid damage to the track.
- Cast iron rip fence is mounted to a large diameter round guide rail with a quick-locking lever for effortless and accurate adjustment.
- 3 sets of anti-kickback fingers: 2 top and 1 set in the table for added operator safety.
- Soft start – Star Delta starter reduces the amp draw on startup.
- Optional laser light to project the cutting line to achieve maximum material yield.
Specifications
Saw blade diameter
|
12″ ~ 15″
|
300 ~ 380mm
|
Saw arbor diameter
|
1.5″
|
Saw arbor speed
|
3500 RPM
|
Feed speeds variable
|
33 ~ 98 FPM
|
10 ~ 30 m/min
|
Max. cutting thickness: 12″ blade
|
3.35″
|
85mm
|
Max. cutting thickness: 13″ blade
|
3.94″
|
100mm
|
Max. cutting thickness: 14″ blade
|
4.33″
|
110mm
|
Max. cutting thickness: 15″ blade
|
4.92″
|
125mm
|
Minimum workpiece length
|
8″
|
200mm
|
Distance between saw and column
|
24″
|
609mm
|
Arbor motor
|
20 HP
|
Feed motor
|
2 HP
|
Table size
|
50″ x 75″
|
1270 x 1905mm
|
Table height
|
31.5″
|
800mm
|
Dust port size
|
5″
|
125mm
|
Net weight
|
3410 lbs
|
1550 kgs
|
Machine dimensions
|
89″ x 57″ x 57″
|
2269 x 1448x 1449mm
|
Shipping weight
|
3960 lbs
|
1800 kgs
|
Shipping dimensions
|
83″ x 63″ x 67″
|
2108 x 1600 x 1702mm
|
Electrical requirements
|
230/3/60 = 60.8 amps
460/3/60 = 30.4 amps
575/3/60 = 24.1 amps
|