The Cantek GT635ARD 25″ Double Surface Planer has a robust cast-iron body for industrial planing day in and day out. The helical insert knife cutterheads produce a smooth planed finish with maximum stock removal. A spring-loaded finger feed system passes the board over the bottom head with the capability of flattening cupped material. The precision digital control and motorized thickness adjustment accurately dimension your lumber. Available in 8″, 16″, 20″, & 24″ thickness capacities!
Why Cantek GT635ARD 25″ Double Surface Planer?
- Spring loaded conveyor pin system ensures material is passed over the bottom cutterhead to resulting in a flat and uniform board prior to planing to thickness on the top head
- Spiral insert knife cutterheads with two-sided solid carbide knives produce a smooth finish with increased stock removal capacity and extremely quiet operation
- Heavy-duty cast-iron machine body and table for vibration free cutting
- Digital electronic thickness adjustment in INCH and MM (Inch = 0.001” / mm = 0.01mm resolution) for precise thickness control
Key Advantage
- 25″ x 8″ capacity as standard with optional 16″, 20″, 24″ thickness capacity
- Cutterheads are spiral insert type with six (6) rows of carbide inserts
- (2) driven and (1) idle bed roll for superior feeding of even difficult material
- Swiveling control panel for more ergonomic access to machine controls
- Inverter variable speed control with feed speeds from 26 to 80 FPM
- Easy to access external handwheel adjustment of infeed bed
- Hard chromed worktable for high wear resistance
- Auto lubrication to conveyor chain, central lubrication for dovetail elevation guideways
- Section chipbreaker and sectional feed roller before top cutterhead
- Rubber outfeed top roller to prevent chip marking
- Over thickness safety shut-off bar across infeed.
- Ammeter for each motor on control panel to monitor motor load
Specification
Maximum working width
|
25″
|
Maximum working thickness
|
8″ (16″, 20″, 24″ optional, please inquire)
|
Minimum working thickness
|
0.315″
|
Minimum workpiece length
|
12.2″
|
Bottom head motor
|
20 HP
|
Top planing head motor
|
25 HP
|
Feed motor
|
5 HP
|
Table elevation motor
|
1/2 HP
|
Cutterhead diameter
|
4″
|
Knife dimensions
|
30mm x 12mm x 1.5mm w/ bevels (96 pcs per head)
|
Cutterhead speed
|
5400 RPM
|
Feed speed (variable)
|
26-80 FPM
|
Dust ports
|
2 @ 6”
|
Table dimensions
|
27″ x 103″ (32″ from the floor)
|
Machine voltage
|
460/3/60 = 69.7 amps
575/3/60 = 56 amps
|
Machine dimensions (LxWxH)
|
105″ x 45.1″ x 67.7″
|
Net weight
|
6600 lbs
|
Packaging dimensions
|
109″ x 49″ x 74″
|
Gross weight
|
7700 lbs
|
Service
https://www.akhurst.com/wp/media/manuals/CANTEK%20CH525%20Control%20-%20Operations%20Manual.pdf
https://youtu.be/iaHFa-n_hdg
https://www.akhurst.com/wp/media/manuals/Cantek%20America%20-%20Service%20and%20Support%20-%20Instructions%20for%20Changing%20Insert%20Knives%20on%20Your%20Heavy-Duty%20Spiral%20Cutterhead.pdf